{"id":73,"date":"2015-10-30T19:14:18","date_gmt":"2015-10-30T19:14:18","guid":{"rendered":"http:\/\/madebyrosenberg.dk\/?page_id=73"},"modified":"2020-07-02T12:29:44","modified_gmt":"2020-07-02T12:29:44","slug":"maskiner-clubfitting","status":"publish","type":"page","link":"http:\/\/madebyrosenberg.dk\/?page_id=73","title":{"rendered":"Maskiner"},"content":{"rendered":"
<\/div>\n\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Maskiner<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

GMX Pro-Tour Clubhead Bending Gauge<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Dette er en super l\u00e6kker Loft & lie maskine som kan tage driver, wood, hybrid, jern og putter.<\/p>

Skrevet af Golfmechanix:<\/strong>
The GMX Pro-Tour Clubhead Bending Gauge is engineered like no other. We started with the successful frame from our 1505XX series, made it 25% larger, and built it over a heavy-duty steel backbone to ensure its complete rigidity while bending the toughest of clubheads. By evenly distributing pressure on the clubhead, we took our proprietary state-of-the-art isostatic soling and clamping pads to a higher level, to prevent slippages and inaccurate measurements.<\/p>

This machine bends woods, irons, hybrids and putters in one easy setup. Currently used by major OEMs and custom fitting centers world-wide, the machine has proven its reliability and performance in the hands of experienced clubmakers. Bending bar sold separately.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Professional Lie & Loft Measuring Gauge<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Tom Wishon g\u00f8r det muligt at rette driver +- 4 grader
Men der skal man have det rigtige v\u00e6rkt\u00f8j for at 100% sikker.<\/p>

Dette er Tom Wishon\u2019s nr.1 maskine til dette arbejde.<\/p>

Skrevet af Golfmechanix
A professional heavy duty golf clubhead measuring gauge used by casting houses and OEM manufacturers to specify lie and loft angle, hosel offset, face progression, face angle, bulge, roll, and hosel to sole length measurements \u2013 on both woods and irons (where applicable). Please inquire for availability and leadtime.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Shaft Testing Machine<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Dette er et fantastisk stykke v\u00e6rkt\u00f8j.
Her har vi mulighed for at finde et skafts st\u00e6rke side og svage side.
Dynamisk loft er vi ikke s\u00e5 interesseret i.
S\u00e5 ved at tilf\u00f8re den st\u00e6rke side mod taget s\u00e5 mindsker vi det dynamiske loft.<\/p>

Skrevet af Golfmechanix:
Detects shaft spine orientation and magnitude. Performs flex sorting, flex zone profiling, and flex matching. Functions and features too numerous to list. Includes RS-232 Software Kit and Shaft Rotation Dial Indicator.<\/p>

\u00a0<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

MOI Matching<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

MOI er balancen i dit udstyr.<\/p>

Her kan man justere balancen s\u00e5 4 jern og 9 jern vil f\u00f8les ens at sl\u00e5 med.<\/p>

Skrevet af Golfmechanix:
The preferred method of advanced clubmakers to custom-fit golf clubs accurately, with a high success rate. Moment of inertia matching of golf clubs is based on Newton\u2019s second law of motion applied to rotational dynamics. The result is a set of golf clubs that maximizes feel and performance for golfers of all skill levels. Auditor MOI Speed Match software included!<\/p>

\u00a0<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Frequency Analyzer<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Denne frekvensm\u00e5ler med indbygget laser, bruges til at FLO skaftet, f\u00f8r skaftet bliver sat i golfk\u00f8llen.<\/p>

SE VIDEO: Denne video viser et korrekt udf\u00f8rt FLOE. Bem\u00e6rk den r\u00f8de plet bev\u00e6ger sig op og ned i lige linje.<\/a><\/strong><\/p>

SE VIDEO: Denne video viser at skaftet ikke er FLOET, men mangler at blive korrigeret. Bem\u00e6rk hvordan den r\u00f8de plet bev\u00e6ger sig i ovaler.<\/a><\/strong><\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Frequency Tip Weight with Built-In Laser<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Denne frekvensm\u00e5ler med indbygget laser, bruges til at FLO skaftet, f\u00f8r skaftet bliver sat i golfk\u00f8llen..<\/p>

SE VIDEO: Denne video viser et korrekt udf\u00f8rt FLOE. Bem\u00e6rk den r\u00f8de plet bev\u00e6ger sig op og ned i lige linje.<\/a><\/strong><\/p>

SE VIDEO:Denne video viser at skaftet ikke er FLOET, men mangler at blive korrigeret. Bem\u00e6rk hvordan den r\u00f8de plet bev\u00e6ger sig i ovaler.<\/a><\/strong><\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Professional Digital Swing Weight Scale<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Dette digitale v\u00e6rkt\u00f8j m\u00e5ler svingv\u00e6gten, som er v\u00e6gtforholdet mellem k\u00f8llen og skaftet. Den kan m\u00e5le helt ned til 0,1 Svingv\u00e6gt point for utrolig pr\u00e6cision. Jo st\u00f8rre svingv\u00e6gt en k\u00f8lle har jo tungere vil den f\u00f8les at svinge med, og modsat jo lavere en svingv\u00e6gt en k\u00f8lle har, jo lettere vil den f\u00f8les at svinge.<\/p>

Skrevet af Golfmechanix:
A derivation of our highly successful OEM digital swing weight scale. This new design offers accuracy, speed, and versatility at an exceptional price. With precision measurements to 0.1 SW-PT.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Compact Bounce Angle Gauge<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Det er vigtigt at bounce p\u00e5 k\u00f8llen er korrekt sat op til din svingstil og det underlag du spiller p\u00e5. Dette v\u00e6rkt\u00f8j m\u00e5ler alt vedr\u00f8rende bounce, der hj\u00e6lper med at skr\u00e6ddersy specielt wedges til dit spil.<\/p>

Skrevet af Golfmechanix:
The 010710 Compact Bounce Angle Gauge is a must-have tool for custom fitting short irons, specialty wedges, and utility clubs. Measures bounce and dig angle, sole width, and leading edge height. Compact design with magnetic base. Easy to use. Accurate to within 0.5 degrees.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Heavy Duty Shaft Extractor<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

At afmontere et skaft med en connector er ikke noget problem med denne maskine da den har fjeder belastning.
Grafit skafter bliver heller ikke vredet i stykker ved afmontering.<\/p>

Skrevet af Golfmechanix:<\/strong>
The Golfmechanix Progressive shaft extractor is a design engineered for maximum pulling power, with a low friction silky smooth stroking action, that provide positive feedback when extracting super light weight shafts and sophisticated shaft
adapters.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Programable Epoxy Cure System<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Et fantastisk varmeapparat som har 10 programmer lagt ind.
5 programmer til jern & 5 programmer til grafit.
Den varmer i 2 trin som variere efter behov.
Men nu kan man lime udstyr sammen p\u00e5 45 min og det er klar til brug. Se en mindre avanceret pr\u00e6senteret i videoen herunder.<\/p>

Skrevet af Golfmechanix:<\/strong>
The Golfmechanix epoxy cure system is a time and temperature controlled golf club
curing rack designed to speed up the hardening of high strength 2 parts epoxy adhesives to full strength within minutes instead of hours especially on cold days or when ambient room temperature is below 20oC \/ 68oF.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Ferrule Insertion Setter<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t

Dejligt lille stykke v\u00e6rkt\u00f8j s\u00e5 man er sikker p\u00e5 at Ferrulesidder p\u00e6nt hver gang.<\/p>

Skrevet af Golfmechanix:<\/strong>
Precision tool for inserting ferrules to the correct depth. Bolts onto a bench. Most designs drive the ferrule into the shaft. The key feature of this design is that it does the opposite \u2013 the shaft is driven into the ferrule. This prevents ferrules from being blunted.<\/p>\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
<\/div>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Maskiner P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. GMX Pro-Tour Clubhead Bending Gauge Dette er en super l\u00e6kker Loft & lie maskine som kan tage driver, wood, hybrid, jern og putter. Skrevet af Golfmechanix: The GMX Pro-Tour Clubhead Bending Gauge is…<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"footnotes":""},"class_list":["post-73","page","type-page","status-publish","hentry"],"yoast_head":"\nMaskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg<\/title>\n<meta name=\"description\" content=\"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"http:\/\/madebyrosenberg.dk\/?page_id=73\" \/>\n<meta property=\"og:locale\" content=\"da_DK\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Maskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg\" \/>\n<meta property=\"og:description\" content=\"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine\" \/>\n<meta property=\"og:url\" content=\"http:\/\/madebyrosenberg.dk\/?page_id=73\" \/>\n<meta property=\"og:site_name\" content=\"Made By Rosenberg\" \/>\n<meta property=\"article:modified_time\" content=\"2020-07-02T12:29:44+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Estimeret l\u00e6setid\" \/>\n\t<meta name=\"twitter:data1\" content=\"5 minutter\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73\",\"url\":\"http:\/\/madebyrosenberg.dk\/?page_id=73\",\"name\":\"Maskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg\",\"isPartOf\":{\"@id\":\"http:\/\/madebyrosenberg.dk\/#website\"},\"primaryImageOfPage\":{\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage\"},\"image\":{\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage\"},\"thumbnailUrl\":\"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif\",\"datePublished\":\"2015-10-30T19:14:18+00:00\",\"dateModified\":\"2020-07-02T12:29:44+00:00\",\"description\":\"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine\",\"breadcrumb\":{\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73#breadcrumb\"},\"inLanguage\":\"da-DK\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"http:\/\/madebyrosenberg.dk\/?page_id=73\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"da-DK\",\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage\",\"url\":\"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif\",\"contentUrl\":\"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif\",\"width\":290,\"height\":290},{\"@type\":\"BreadcrumbList\",\"@id\":\"http:\/\/madebyrosenberg.dk\/?page_id=73#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Hjem\",\"item\":\"http:\/\/madebyrosenberg.dk\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Maskiner\"}]},{\"@type\":\"WebSite\",\"@id\":\"http:\/\/madebyrosenberg.dk\/#website\",\"url\":\"http:\/\/madebyrosenberg.dk\/\",\"name\":\"Made By Rosenberg\",\"description\":\"Professionel Clubfitting & Custom Builder\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"http:\/\/madebyrosenberg.dk\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"da-DK\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Maskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg","description":"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"http:\/\/madebyrosenberg.dk\/?page_id=73","og_locale":"da_DK","og_type":"article","og_title":"Maskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg","og_description":"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine","og_url":"http:\/\/madebyrosenberg.dk\/?page_id=73","og_site_name":"Made By Rosenberg","article_modified_time":"2020-07-02T12:29:44+00:00","og_image":[{"url":"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif"}],"twitter_card":"summary_large_image","twitter_misc":{"Estimeret l\u00e6setid":"5 minutter"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"http:\/\/madebyrosenberg.dk\/?page_id=73","url":"http:\/\/madebyrosenberg.dk\/?page_id=73","name":"Maskiner Professionel clubfitting - V\u00e6rkstedet - Made By Rosenberg","isPartOf":{"@id":"http:\/\/madebyrosenberg.dk\/#website"},"primaryImageOfPage":{"@id":"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage"},"image":{"@id":"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage"},"thumbnailUrl":"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif","datePublished":"2015-10-30T19:14:18+00:00","dateModified":"2020-07-02T12:29:44+00:00","description":"P\u00e5 v\u00e6rkstedet har vi maskiner til ethvert t\u00e6nkeligt form\u00e5l. L\u00e6s her hvilke maskiner vi bruger og hvad vi bruger dem til. Shaft Testing Machine","breadcrumb":{"@id":"http:\/\/madebyrosenberg.dk\/?page_id=73#breadcrumb"},"inLanguage":"da-DK","potentialAction":[{"@type":"ReadAction","target":["http:\/\/madebyrosenberg.dk\/?page_id=73"]}]},{"@type":"ImageObject","inLanguage":"da-DK","@id":"http:\/\/madebyrosenberg.dk\/?page_id=73#primaryimage","url":"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif","contentUrl":"http:\/\/madebyrosenberg.dk\/wp-content\/uploads\/2015\/09\/GMX-Pro-Tour-Clubhead-Bending-Gauge.gif","width":290,"height":290},{"@type":"BreadcrumbList","@id":"http:\/\/madebyrosenberg.dk\/?page_id=73#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Hjem","item":"http:\/\/madebyrosenberg.dk\/"},{"@type":"ListItem","position":2,"name":"Maskiner"}]},{"@type":"WebSite","@id":"http:\/\/madebyrosenberg.dk\/#website","url":"http:\/\/madebyrosenberg.dk\/","name":"Made By Rosenberg","description":"Professionel Clubfitting & Custom Builder","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"http:\/\/madebyrosenberg.dk\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"da-DK"}]}},"_links":{"self":[{"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/pages\/73","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=73"}],"version-history":[{"count":11,"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/pages\/73\/revisions"}],"predecessor-version":[{"id":2181,"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=\/wp\/v2\/pages\/73\/revisions\/2181"}],"wp:attachment":[{"href":"http:\/\/madebyrosenberg.dk\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=73"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}